ID TECH builds rugged, secure payment hardware for the toughest environments. Paying.co builds the software that turns it into a full payment solution — NEO 3 Common Kernel applications, unattended and OEM workflows, and processor and middleware integrations. When EMV Level 3 certification is required, that's a separate workstream we run end to end in the same engagement.
ID TECH's hardware lineup spans unattended terminals, mobile and handheld POS, and OEM card readers — all unified by the NEO 3 Common Kernel. Paying.co builds custom applications, workflows, and EMV-certified integrations across the entire range. One engagement, one engineering team, one certification deliverable per processor.
Rugged, weather-tough payment hardware engineered for outdoor and unattended environments. Paying.co builds the native application layer and MDB or Pulse connectors that bridge ID TECH to the machine. When the deployment also requires EMV Level 3 certification, we run that as a separate, well-scoped workstream alongside — for vending, EV charging, parking, transit, and kiosks where the device has to keep running through everything.
Unattended SystemsAndroid-based handheld POS for retail, hospitality, and field service. We build native Android applications, tipping and split-tender flows, order capture, loyalty enrollment, and full back-of-house integration — all running on the same NEO 3 Common Kernel certified on your processor.
Mobile DevelopmentOEM card readers, ATM modules, and embedded payment products that ship inside your own hardware. Paying.co handles the SDK work, custom firmware, and the security boundary so your branded product hits the market with EMV L3 certification and PCI 6.X SRED compliance already in place.
Embedded PaymentsID TECH builds the device. Paying.co builds everything that turns it into a deployable payment solution — from the NEO 3 application layer down to the processor integration and the EMV Level 3 certification deliverable. One vendor, one engineering team, one engagement scope.
Build once on ID TECH's NEO 3 Common Kernel and deploy across the full device range — AP6800, VP6825, Kiosk V, AP3880P, and OEM modules. Consistent payment logic, one EMV cert path, every form factor.
Multi-step transaction flows, data capture screens, loyalty enrollment, age verification, fleet pin entry, guided unattended user journeys — designed and built native to ID TECH endpoints, not glued on afterward.
The cert work processors require, done in-house. 130+ L3 certifications shipped, with deep familiarity across Visa, Mastercard, American Express, and Discover scripts on ID TECH hardware. The certification is the deliverable.
We don't disappear at deployment. Production support, processor recerts when specs change, ID TECH firmware updates, and version compatibility — we maintain the application as a living piece of software for as long as your fleet runs it.
ID TECH builds some of the best unattended and OEM payment hardware on the market — the AP6800, VP6825, Kiosk V, AP3880P, and the OEM module lineup behind them. The hardware is engineered to last a decade in the field. The application running on top of it deserves the same standard.
That's where Paying.co fits. We've completed numerous EMV Level 3 certifications across ID TECH devices and have deep experience with the NEO 3 platform, PCI 6.X SRED security boundaries, and the connector work to Datacap, Worldnet, BridgePay, Cardknox, CardConnect, and direct processor relationships. We've built the custom apps, the workflows, the firmware integrations, and the certifications across EV charging, vending, parking, transit, ATM, and OEM deployments.
The point is simple: you pick the ID TECH device because it solves a hardware problem. We solve the software problem on top of it — with one team, one statement of work, and one certified deliverable per processor.
Talk to our ID TECH teamWe build where ID TECH actually wants applications built — against the NEO 3 Common Kernel, with full PED control, certified end-to-end through the processor's test environment. No wrappers. No middleware sitting in the middle charging rent. The application is yours, the certification is yours, the source is documented.
One kernel, one integration, multiple environments. Build the EMV flow once and deploy it across ID TECH's full device lineup — AP6800, VP6825, Kiosk V, AP3880P, OEM modules. Consistent payment logic across the whole fleet.
Seamless integration with Datacap middleware, direct processor connections, and gateways like Worldnet, BridgePay, Cardknox, and CardConnect. The connector layer is well-trodden ground for us — not a research project.
Deep familiarity with PCI 6.X SRED hardware boundaries, secure key management, P2PE-aware design, and the audit-grade transaction logging processors actually require. The compliance work is the work, not an afterthought.
For OEMs building branded kiosks, devices, and machines around an ID TECH module — we handle the SDK work, the custom firmware, the embedded application, and the EMV cert on top. Your product, your branding, our payment stack inside.
Paying.co has shipped EMV-certified ID TECH integrations across the gateways and middleware that matter for unattended and OEM environments — Datacap, Worldnet, BridgePay, Cardknox, and CardConnect, plus direct integrations into the major processors. If your business already routes through one, we drop into that flow. Need a direct processor cert? That's our specialty.
Deep, production-shipped integration with Datacap's NETePay and dsiEMVUS middleware on ID TECH endpoints. The most widely deployed payment gateway in North American unattended — and one we know cold.
Direct integration with Worldnet's payment gateway and unattended processing rails. Certified flows on ID TECH hardware, configured for the international and multi-currency deployments Worldnet specializes in.
Native integration paths into BridgePay's gateway and tokenization platform. Built and certified on ID TECH devices for ISV and ISO partners who route their volume through BridgePay.
Direct integration with the Cardknox gateway and developer platform. Production-shipped on ID TECH hardware with full EMV L3 certification and tokenization support for retail and unattended.
Built to CardConnect's CardPointe and CoPilot platforms. We've certified ID TECH endpoints into CardConnect's processing rails for ISV partners and direct merchant deployments alike.
Need a direct EMV Level 3 certification straight to TSYS, Worldpay, Fiserv, Global, Elavon, or another acquirer? That's our day job. 130+ L3 certs shipped across the Western Hemisphere.
ID TECH is the go-to hardware vendor for deployments where weather, vibration, vandalism, and 24/7 uptime are non-negotiable. Paying.co builds the application and workflow layer for those same environments — tested, certified, and ready for the field.
Outdoor-rated contactless and chip acceptance for EV charging networks. Custom workflows for session start, plan selection, and roaming agreements.
True outdoor payment hardware for unattended parking and tolling. Pay-on-foot, pay-by-plate, and gateless flows engineered for extreme conditions.
Tap-to-ride contactless acceptance, turnstile integrations, and farebox modernization on devices like Kiosk V across transit touchpoints.
VP6825, AP6800, and OEM solutions for vending, micro-markets, and unattended retail. MDB and Pulse support built in for cashless retrofits.
OEM card reader integrations and EMV-certified flows for ATM operators and self-service banking deployments. Firmware and SDK work included.
Contactless reader integrations for loyalty enrollment, mobile wallet acceptance, and rewards capture on top of the payment transaction.
Android handheld POS builds on AP3880P for retail, restaurants, and hospitality with tipping, splitting, order capture, and back-office sync.
Embedded payment integrations and custom firmware for OEMs building branded kiosks, devices, and machines around ID TECH modules.
Every Paying.co ID TECH engagement runs against a documented Statement of Work, with named owners on both sides, a defined certification milestone, and a deployment plan. Custom forms and workflows land in 4–8 weeks. MDB and Pulse connector projects land in 8–16 weeks. Comprehensive unattended or OEM application builds land in 3–6 months. EMV Level 3 certification — a separate workstream with its own scope — typically runs 6–12 months depending on processor and card brand scope. You always know where the project stands.
We map your use case, target environment, and existing infrastructure. Our team picks the right ID TECH device family — NEO 3 unattended, mobile, countertop, or OEM — and architects the workflow before a line of code is written.
Custom forms, multi-step workflows, and user interfaces optimized for ID TECH endpoints. Interactive prototypes validate the user journey on actual hardware before we commit to full development.
Our engineers build ID TECH-native applications and firmware integrations with seamless Datacap, processor, and middleware connectivity. Payment logic, backend integration, and compliance handled across the build cycle.
We run the complete EMV Level 3 certification across ID TECH devices — Visa, Mastercard, American Express, Discover — ensuring end-to-end compliance with all card brands and the processor's test environment before go-live.
Applications deploy across your ID TECH fleet with monitoring, updates, and technical support. Recerts when processor specs change, firmware compatibility when ID TECH ships new versions — we keep the fleet alive.
Same engineers, same project manager, same EMV cert team for the life of the application. When your processor releases a script update or ID TECH publishes a firmware change, you have a phone number that already knows your stack.
Tell us what you're building on ID TECH. We'll tell you what it takes to get it certified, integrated, and shipped — and you'll hear back from a payments engineer, not a sales rep.